Acceptable material: Resins such as chemical wood and modeling wax (no metals). X, Y and Z axis travel: 305 (X) x 305(Y) x 105 (Z) mm. Collet to table distance: Maximum 123 mm. Table size: 305 (W) x 305 (D) mm. Max. acceptable weight: 4 kg on equipment. E, Y and Z axis drive system: Stepper motor. Feed rate X-axis X-Y: 7 to 3000 mm/sec. Z-axis: from 7 to 1800 mm/sec. * 2 mm/min step per 7 to 601 mm/min. * 60 mm/min step by step from 60 to 3000 mm/min. Software resolution: Code-NC: 0.001 mm/step RML-1: 0.01 mm/step. Mechanical resolution: 0.002 mm/step (micro-step control). Rotor motor: brushless DC motor, max. 100W. Max. rotor rotation: 4500 to 15000 rpm. Cutting tool chuck: Collet. Interface: USB (complying with Universal Serial Bus Revision 1.1 specification). Instruction commands: NC code, RML-1. Power requirements: AC 100 to 240 ± 10%, 2.1A 50/60 Hz (Over Voltage Category II, IEC 60664-1). Power consumption: Approx. 210W. Noise level: Approx. 210W (no-charge operation) 42 dB (A) or less (standby). Dimensions: 669 (W) x 760 (D) x 554 (H) mm. Weight: 65 kg. Environment: Temperature: 5 to 40°C (41 to 104°F). Humidity: 35 to 80% (non-condensing).