Acceptable material: Resins such as chemical wood and modeling wax (no metals).
X, Y and Z axis travel: 305 (X) x 305(Y) x 105 (Z) mm.
Collet to table distance: Maximum 123 mm.
Table size: 305 (W) x 305 (D) mm.
Max. acceptable weight: 4 kg on equipment.
E, Y and Z axis drive system: Stepper motor.
Feed rate X-axis X-Y: 7 to 3000 mm/sec.
Z-axis: from 7 to 1800 mm/sec.

• 2 mm/min step per 7 to 601 mm/min.
• 60 mm/min step by step from 60 to 3000 mm/min.
  Software resolution: Code-NC: 0.001 mm/step
  RML-1: 0.01 mm/step.
  Mechanical resolution: 0.002 mm/step (micro-step control).
  Rotor motor: brushless DC motor, max. 100W.
  Max. rotor rotation: 4500 to 15000 rpm.
  Cutting tool chuck: Collet.
  Interface: USB (complying with Universal Serial Bus Revision 1.1 specification).
  Instruction commands: NC code, RML-1.
  Power requirements: AC 100 to 240 ± 10%, 2.1A
  50/60 Hz (Over Voltage Category II, IEC 60664-1).
  Power consumption: Approx. 210W.
  Noise level: Approx. 210W (no-charge operation)
  42 dB (A) or less (standby).
  Dimensions: 669 (W) x 760 (D) x 554 (H) mm.
  Weight: 65 kg.
  Environment: Temperature: 5 to 40°C (41 to 104°F).
  Humidity: 35 to 80% (non-condensing).